10
10
TECHNICAL SPECIFICATIONS
Motor and Electricals:
Power Input Requirements
115V, 1 Phase
Motor Type
TEFC Induction
Motor Power
2HP (1.5kw), 220V, 3ph, 60hz, 6.6A,
1720rpm
Starting Amps
9.2A
Running Amps (No Load)
1.7A
Inverter
Economic Type, 115V, 1PH
Power Cable
3x14awg, 6 Ft
Power Plug
120V
Recommended Circuit and Fuse/Breaker Size 15A
Sound Emission Without Load
70db
Coolant Pump
1/8HP, 115V 1ph, 60hz, 0.7A
Capacities:
Drilling Capacity, Cast Iron
1
.5” (38.1mm)
Drilling Capacity, Mild Steel
1
.375” (34.9mm)
Tapping Capacity, Cast Iron
.875” (22.2mm)
Tapping Capacity, Mild Steel
.75” (19.05mm)
Spindle To Table Maximum Distance
30
.25” (768.3mm)
Spindle To Base Maximum Distance
44
.5” (1130.3mm)
Spindle To Column Maximum Distance
10
.4375” (265.1mm)
Coolant Capacity
2 Gal. (7.5L)
Spindle:
Spindle Taper
MT-3
Spindle Speed
Variable, 120
– 2000rpm
Spindle Travel
6
” (152.4mm)
Rotation
Fwd/Rev (Rev = Tapping Only)
Table and Column:
Table Size
22
” x 18.75” (559 x 476mm)
Table Working Surface
18
.125” x 14.75” (460 x 375mm)
Table Travel:
Without Rack Adjustment
15
” (381mm)
Maximum Travel With Rack Adjustment
20
” (508mm)
T-Slot Number
3
Summary of Contents for DP-1375VS-110
