5-1
Chapter 5 Reference Table for Selection of Tools and Materials
Chapter 5 Reference Table for Selection of Tools and Materials
5-1 Introduction of Each Type of Tools
Used for Photos, Grayscale Graphics, Text, Relief Artworks and Elaborate Carvings (Finishing Cuts).
Used for Photos, Grayscale Graphics, Text, Relief Artworks and Elaborate Carvings (Finishing Cuts).
Used for Photos, Grayscale Graphics, Text, Relief Artworks and Elaborate Carvings (Finishing Cuts).
Conical Radius Ball Nose Tool
Half Conical Radius Ball Nose Tool
Ball Nose Tool
4025C150
D: 4 mm
H: 15 mm
R: 0.25 mm
Stepover: 0.06 mm
4050E150
D: 4 mm
H: 15 mm
R: 0.5 mm
Stepover: 0.12 mm
4025A020
D: 0.5 mm
H: 2 mm
R: 0.25 mm
Stepover: 0.06 mm
4050C150
D: 4 mm
H: 15 mm
R: 0.5 mm
Stepover: 0.12 mm
4100E150
D: 4 mm
H: 15 mm
R: 1 mm
Stepover: 0.2 mm
4050A020
D: 1 mm
H: 2 mm
R: 0.5 mm
Stepover: 0.12 mm
4100C150
D: 4 mm
H: 15 mm
R: 1 mm
Stepover: 0.2 mm
4150E150
D: 4 mm
H: 15 mm
R: 1.5 mm
Stepover: 0.3 mm
Note:
D=Shank Diamter
H=Flute Length
R=Tip Radius