14
14
ASSEMBLY AND SET UP
1. To assemble, first place the base plate
upside down and attach the four casters to
the holes provided and tighten with the
wrench. (See FIG. 1)
(FIG.1)
2. With the collector body & fan/motor
assembly in place, secure it to the base
plate using the screws provided. (See
FIG. 2)
(FIG.2)
Two Person Lift. Use an assistant or lifting devise to fan and motor if needed.
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.
Summary of Contents for DC-1300B
Page 22: ...20 20 EXPLODED DIAGRAM...
