![background image](http://html1.mh-extra.com/html/emil-company-europe/x2sb/x2sb_instruction-manual_2401342001.webp)
EN
DUST COLLECTOR (DRAWER) FOR MANICURE Х2SB
COSMETIC DEVICE NOT INTENDED FOR HOUSEHOLD USE, TRADEMARK "EMIL"
Instruction Manual
Caution!
- The dust collector (drawer) is not intended for household use! Use it only to perform
the intended functions - professional use (manicure)!
- This device is not intended to be used by persons (including children) with limited
physical, perceptive or mental abilities nor the persons with lack of experience and
knowledge, except for cases, when they have been trained by the person responsible
for their safety.
- Children should be supervised to prevent playing with the device.
- In case of damaging the feeder cable, to prevent any hazards it should be replaced by
the manufacturer, relevant service or equally qualified personnel.
- No parts of the appliance should be exposed to water. Maintenance: Unplug this
product from wall outlets before cleaning. Clean the unit with a lightly moistened cloth
treated with an antiseptic alcohol base solution. Avoid contact with water! - Clean the
dust bag with warm water every working day! The manufacturer is not responsible for
the suction capacity if the dust bag is not completely dust-free! - Only use original bags
supplied with the appliance! - Avoid direct sunlight! - Store and use the device at room
temperature (+ 15 ° C to + 35 ° C), with a maximum humidity of 60%.
- The failure to comply with this user manual may reduce the safety and quality of this
device.
Dust collector device is intended for collection of dust and small particles produced during
manicure and operations concerning nail growing.
Type
: Built-in
Description
Dust collector (drawer) consists of a body with integrated suction fan with blades protected
with chrome plated metal grid, cable with a switch, double layered bag for collection of
dust and small particles.
Preparation for operation and turning on the device
According to the sample (template), the Emil X2SB unit should be mounted on the table,
the fan with the plastic casing should remain at the bottom of the table and the fan casing
with the grille should be screwed on top of the table. Before turning on the device the dust
and small particle collector bag must be attached to the special dust collector (drawer)
ring. The device is switched on using a switch on the feeder cable.
CAUTION! Warranty is valid only if the client follows the warranty and operation
conditions.
Conditions of warranty repairs.
Warranty applies in following cases:
1.
Availability of warranty ticket that is attached to the device according to the operational
conditions.
2.
Presence of document confirming the transaction (purchase (cash-register)
receipt, stringent accountancy receipt or bank transfer order) that identifies the particular
device purchased.
3.
Manufacturer shall be held liable for the suction capacity of the
device only in case the dust collector bag is completely free of dust!
4.
Device shall be
taken to warranty repair together with the warranty ticket and document confirming the
transaction.