Baileigh Industrial BR-16E-36, Operator'S Manual

Page: 35 / 36

Swage & Jenny Machine
Safety Instructions
1. Maintenance.
Make sure the Swage & Jenny is
turned off and disconnect from the main power
supply and make sure all moving parts have come to
a complete stop before any inspection, adjustment
or maintenance is carried out.
2. Swage & Jenny Condition.
A Swage & Jenny must
be maintained for a proper working condition. Never
operate a Swage & Jenny that has damaged or
worn parts. Scheduled routine maintenance should
performed on a scheduled basis.
3. Roll Condition.
Never operate a Swage & Jenny
with a damaged or badly worn rolls. Replace if
required. Rolls should never be greased or lubricated
as rolls will slip the material and will not bend.
4. Roll Direction.
Be aware of the correct rotational
axis of the motor when a qualified electrician
connects the Machine.
5. Hand Hazard.
Keep hands and fingers clear from
moving parts. Serious injury can occur if hand or
finger tips get pinched by rolls and can be dragged
into machine.
6. Personal Protection.
Gloves, safety glasses and
safety hat are recommended during operation.
7. Avoiding Entanglement.
Swage & Jenny guards
must be used at all times. Tie up long hair and use
the correct hair nets to avoid any entanglement with
the Swage & Jenny moving parts.
8. Understand the machines controls.
Make sure you
understand the use and operation of all controls.
9. Trained Operator.
This machine must be operated
by authorized and trained personnel.
10. Power outage.
In the event of a power failure
during use of the machine, turn off all switches
to avoid possible sudden start up once power is
restored.
11. Work area hazards.
Keep the area around the
Swage & Jenny clean from oil, tools, chips. Pay
attention to other persons in the area and know
what is going on around the area to ensure
unintended accidents.
12. Guards.
Do not operate Swage & Jenny without the
correct guards in place. Necessary guards protect
you from injuries by gearbox, motors and other
moving gears & parts. The only other area which
needs to be carefully monitored during use is the
rotational area of the rolls.
13. Material condition.
Material must be clean of oil
and dry. Oily material can slip and will not bend.
14. Material hardness.
Make sure your hardness is
the same throughout the material, we recommend
that you use certified material. Never bend hard
steel, glass or fragile material on this machine.
15. Feeding material.
Making a tight bend in one pass
is not possible. So you need several passes before
you can achieve a certain radius. Tighter curves
and full radius always need more passes.
16. Stopping the Rolls.
Do not stop or slow the rolls
with your hand or workpiece. Allow the Swage &
Jenny to stop on its own.
17. Emergency stop.
Use the emergency stop button
in case of any emergency.
18. Hearing protection and hazards.
Always wear
hearing protection as noise generated from
machine and workpiece can cause permanent
hearing loss over time.
19. Call for help.
If at any time you experience
difficulties, stop the machine and call you nearest
branch service department for help.
Machinery House
requires you to read this entire Manual before using this machine.