14
14
Base Mounting Dimensions
Use the dimensions and pattern below to layout and drill the mounting holes to secure the
grinder to a bench or stand.
Anchoring the Machine
•
Once positioned, anchor the machine to the floor, as shown in
the diagram. Use bolts and expansion plugs or sunken tie rods
that connect through and are sized for the holes in the base of
the stand.
•
This machine requires a solid floor such as concrete at a
minimum of 4” (102mm) thick. 6” (153mm) minimum is preferred.
.31"
(7.87mm)
.50"
(12.7mm)
Summary of Contents for BG-248-2
Page 26: ...24 24 PARTS DIAGRAM...
Page 31: ...29 29 NOTES...
