④
Set SW1 to H on both boards.
⑤
plug micro USB cable to USB Con on any of two boards.
Make sure Giant Plus is off before connecting micro USB
cable.
⑥
Power the selected board on by plugging in 2 of power
cables on the board and check LEDs have lights flow
through.
⑦
Download following list of updating tools available from
Baikal_Giant_Plus_V00_DATE.zip ) :
Name
Description
dfu-util.exe
USB DFU(Device Firmware Utility) protocol based
flash programming console application.
update_firmware_giant
plus.bat
Firmware update batch file.
zadig_2.1.2.exe
USB Driver Installer
baikal_Giant Plus.bin
Firmware binary image.
2.
Install DFU Utility driver
①
Connect the other end of micro USB cable to your PC.
②
Check if you have STM Device in DFU Mode on device
manager.
③
Run zadig_2.1.2.exe
④
Select Options>List all devices.
⑤
Select
‘
DFU Util
’
on USB device list, then replace driver.
