Baier BSS 607M, Manual, Page: 17 / 272

– 2
1 Electrodes
2 Suction hose
3 Hose hook
4 Crevice nozzle
5 Air outlet, working air
6 Suction head
7 Suction head lock
8 Tool adapter
9 Suction force regulator (continuous)
10 Rubber sleeve, screwable
11 Recessed grip
12 Dirt receptacle
13 Steering roller
14 Handle
15 Air inlet, motor cooling air
16 Suction support
17 Stopper
18 Floor nozzle
19 Suction tube
20 Stop for tool box
21 Fixing eyelet
22 Filter cover
23 Carrying handle
24 Rotary switch for suction hose cross
section
25 Rotary switch for suction output (min-
max)
26 Rotating knob
27 Socket
28 Scale of the suction hose cross section
29 Bender
30 Floor nozzle holder
31 Holder for suction pipe
32 Power cord
33 Holder for bender
34 Filter frame
35 Flat fold filter (PES)
36 Filter dedusting
37 Nameplate
 DANGER
– When the outgoing air is carried back
into the room, a sufficient ventilation
rate L in the room must be ensured. To
comply with the required limit values the
carried back volume flow must be 50%
of the fresh air volume flow (room vol-
ume V
R
x ventilation rate L
W
) at maxi-
mum. Without a specific ventilation sys-
tem the following applies: L
W
=1h
–1
.
– Only persons trained in the use of the
machine and the handling of substanc-
es for which the machine is to be used
including training in the safe disposal of
the sucked-in material may use the ma-
chine.
Device elements Symbols on the machine
WARNING: This unit contains hazardous
dust. Emptying and maintenance, includ-
ing the removal of the dust bag, may only
be carried out by someone who is familiar
with the unit and wearing suitable protec-
tive gear. Do not switch on the unit until the
complete filter system has been installed
and the function of the volume-flow control
has been tested.
Flat fold filter (PES)
Item no.
73684
Flat fold filter (PTFE)
Item no.
8462
Fleece filter bag
Item no.
9341
Dust disposal bag
Item no.
9276
Safety instructions
!
M M
17 EN