14
Figure 3-9 Transportation of the Antenna in the Height
3. Fix the pole vertically to the ground or concrete pillars on the rooftop using expansion
screws, and fasten it with steel wires. Then, mount the omnidirectional outdoor
antenna onto the pole using the installation rack, as shown in Figure 3-10.
Figure 3-10 Directional Antenna Installation
4. Connect all cables and wires and fix them, when the base station has been installed
in a proper position
5. A lightning protector is mandatory in the connection between the mBS1100 base
station and the antenna feeder. The N-type male connector of the lightning protector
should be connected to the ANT port of the base station, as shown in Figure 3-11.
Summary of Contents for mBS1100
Page 9: ......
