Baicells Atom ID0406-6.5, User Manual, Page: 9 / 39

4
LED Description Status Meaning
LAN (on back) Ethernet indicator
Off No Ethernet connection
Steady on Ethernet connection is normal
Blinking Ethernet data is being transmitted
Table 3: Interfaces
Interfaces vary by model; not all models will have all of the interfaces listed.
Interfaces Description
USIM Universal Subscriber Identity Module card slot. 1.8 V/3.0 V USIM 2FF
LAN One to four RJ-45 ports, LAN, 10/100 (CAT4) or 10/100/100 (CAT6/7) auto-
sensing, auto-MDX interface to connect to computer or other network devices
(e.g., hub or switch). Compatible with IEEE 802.3/802.3u standards.
RESET Press the reset button for one second to reset the unit. Press the reset button for
10 seconds to restore the unit to its factory settings.
DC-5V Power Connector Port to attach the power adaptor provided with the unit
Power Switch Power on/off
POTS-RJ11
(Atom ID06-6.5 only)
RJ-11 telephone port(s). Used for phone/fax/POS, providing VoIP functions under
conditions of software support.
5 Installation
The steps for installing the unit are provided below.
ATTENTION: Never power on the unit while installing or uninstalling the USIM card. Doing so
could damage the card and the unit.
1.
Insert the USIM card: Open the protective cover of the USIM card slot on the top of the Atom
unit and insert the USIM card into the slot (Figure 4). Close the cover.
Figure 4: Insert USIM Card