15
2. In the connection Method area, set the connection method
3. There are two methods to connect the LTE network, it is needed to choose a method
between Auto and Manual, if you want to auto connect to the LET network you should
choose the Auto, otherwise you should choose Manual.
4.
Click “
SAVE & APPLY
”.
4.3.3
Set Scan Mode
To set the LTE network scan mode, perform the following steps:
1. Choose
“
LTE>Scan Method
”, enter the setting scan method page, as shown in
Figure
4-4
.
Figure 4-4 Set Scan Mode
2. In the Scan Method area, set the scan mode
3. You can choose full Ban
d, Frequency Lock, or PCI Lock
.
4.3.4
Lock Frequency (Earfcn)
To clock the frequency, perform the following steps:
1. Choose
“
LTE>Scan Method
”.
2. In the LTE Scan Method area, click Frequency Lock to lock the frequency.
3. Click
ADD LIST
, choose a band and frequency, and then click
Add
to add the band
and frequency to the list, as shown in
Figure 4-5
.
