Bai cells EG7035, User Manual

Page: 15 / 24

9
4. CPE Configuration
Log in 4.1
By using a Web browser to login the CPE management page, the CPE configuration
management. Log on to the Web management page steps are as follows:
1. Power on.
2. In the address column of browser, type in http://192.168.1.1, then press “ Enter ”,
login in page is shown in
Figure 4-1
.
Figure 4-1 Login Page
3. Enter the user name and password, click " Login " button. After password
authentication, you can log on to the web management page.
The default user name/password: admin / admin .
In order to more secure your data, it is recommended that you open the firewall,
and keep your login password, WLAN FTP passwords and password.
Basic Configuration 4.2
Network Mode 4.2.1
To set the network mode, perform the following steps:
1. Choose Network Setting > Network Mode .
2. In the Network Mode area, select a mode between Route and Bridge.
3. Click “ Submit ”.