USB to Serial Adapter User’s Manual 21
6.4 After finishing these processes, you can use USB to Serial Bridge Cable to
connect RS232 Serial 56K FAX Modem and execute the Dial-up function to
connect Internet, and send the FAX with the FAX software (i.e.: Microsoft FAX)
properly.
7.
7. T r o u b l e S h o o t i n g
T r o u b l e S h o o t i n g
If you can successful install the driver but cannot use the USB-Serial Adapter with
connect the other device:
Go to the
Control Panel-System-Device Manager and check the COM
(COM&LPT),
if you cannot see this item:
7.1 Please check the
BIOS setting I/O configure setting Onboard serial
port 1
, choose the setting is enabled and choose the value. Then return to the
windows and check it again.
7.2 Go to the
Control Panel Add New Hardware
, following the step and choose
the hardware from the list, select the
Ports(COM&LPT
) and following the step
to install the driver that is needed.
(In this process you may need to put the
WINDOWS CD into the CD-ROM drive.)
8.
8. Disclaimer
Disclaimer
Information in this document is subject to change without notice. The manufacturer
does not make any representations or warranties (implied or otherwise) regarding the
accuracy and completeness of this document and shall in no event be liable for any
loss of profit or any other commercial damage, including but not limited to special,
incidental, consequential, or other damages.
No part of this document may be reproduced or transmitted in any form by any means,
electronic or mechanical, including photocopying, recording or information recording
and retrieval systems without the express written permission of the manufacturer.
All brand names and product names used in this document are trademarks, or
registered trademarks of their respective holders.
9.
9. FCC Statement
FCC Statement