Weld Analyzer – BMS 210AD
www.BAFFCO.com
Edition : July 2014
6-
Now the instrument is waiting for a current and will measure it.After measuring, you will see
over all measured values on the screen. To see more details press Enter Key and move
thorough results by pressing Arrow Keys.
The instrument automatically saves any measuring in the internal memory. Maximum record
number is 999.
7.3. Measuring Rectified Current (DC)
If the current is rectified and average is not zero, you can measure the current by putting the
instrument in DC current mode. In this case, current can be a DC or medium frequency welding
current.
There are some selection to match the device with current behavior more exactly. You can set
maximum “no-current” time (cool time),measuring range, rise time(time to start measuring) and
fall time (time to finish measuring). To learn how to use these abilities follow these instructions:
1-
Connect toroid to the instrument
2-
Put toroid around the conductor.
3-
By pressing the setting bottom you can go to the setting page.
17