background image

19

SERVICE AND WARRANTy POLICy

  

DEALER MANUAL

 

MM G510.1000

5 SERVICE AND WARRANTY POLICY

Suzhou Bafang Motor Science-Technology Co., Ltd (hereinafter referred to as the BAFANG) guarantees: 
During the warranty period, BAFANG gives warranty for products bought from BAFANG or dealers, as 
long as the reclamation concerns quality defects caused by the material or manufacture. (This only applies 
to BAFANG complete drive systems; BAFANG component parts are not covered by the warranty.)

Warranty Period and Scope

The warranty period starts from the date of leaving factory. It is 30 months for motors, and 18 months 
for controllers, displays, sensors and other electrical components. 

The following faults are not covered by the warranty:

• 

Damage, failure and/or loss caused by refitting, neglect or improper maintenance, use for competiti-
on or commercial purposes; incorrect or improper use or accidents

• 

Damage, failure and/or loss due to transport by the purchaser

• 

Damage, failure and/or loss on/of the product caused by improper installation, adjustment or repair

• 

Damage, failure and/or loss not caused by the material or manufacture, but by incorrect use by the 
purchaser

• 

Damage, failure and/or loss to the exterior of the product that dooes not affect its function

• 

Damage, failure and/or loss caused by repair or installation undertaken by repair bases or dealers 
unauthorized by BAFANG

• 

Damage, failure or loss caused by normal wear and tear

BAFANG reserves the right to repair or replace faulty components, and is only obliged to repair or replace 
them. 

If bike manufacturers or dealers encounter quality issues when using or selling BAFANG products, they 
can report the purchase order number and serial number of the product to BAFANG service department. 
who will check whether the products are under warranty or not. For products under warranty, BAFANG 
will provide free repair or give a replacement. If a repair is necessary after the expiry of the warranty 
period, BAFANG will invoice component parts, labor cost and shipping. If the BAFANG system needs 
repairing on a bike, please contact the bike manufacturer or dealer directly.

If this warranty statement is against a current law at the place of business of the dealer, the legislation 
currently in force shall prevail. BAFANG reserves the right to modify the terms without prior announce-
ment.

For more information, please visit the company website: www.szbaf.com

Summary of Contents for MM G510.1000 12 027





















Reviews: