04/01/2021
The Unofficial Luna X-1 Enduro Display Manual | An unofficial manual for Luna Cycle’s awesome X-1 Enduro e-bike.
https://bradland.github.io/unofficial-luna-x-1-enduro-display-manual/
4/6
These settings can be configured to adjust the operation of your bike.
Unit
Configures the linear unit of measure used for speed, trip, odometer, etc.
Imperial: miles
Metric: kilometers
Auto Off
Configures the time (in minutes) before the system automatically turns off. Can be disabled by selecting
OFF
from the menu. Note that the system draws a small amount of power, even when the bike is not moving. It will
slowly deplete your battery if auto off is disabled and the bike is left on.
OFF, 0–9
Brightness
The brightness of the display as a percentage of maximum intensity.
10%, 30%, 50%, 75%, 100%
Power View
Configures the unit used to display the real time power output.
Current: amps
Power: watts
Al Sensitivity
Configures the sensitivity of the light sensor for the backlight / headlight. Note that this is a capital “a” followed
by a lower case “l”, which stands for
A
uto-
L
ight. The font makes it easily confused with
A
rtificial
I
ntelligence.
Other display firmware versions use all-caps “AL”.
0–5
0 disables the auto-light
1 is the lowest sensitivity
5 is the highest sensitivity
Trip Reset
Resets the trip values. See
Info Display
section for a list of values reset by this function.
YES, NO
Vibration
Enables a vibration with each press of a controller button.
YES, NO
