4
BF-DM-C-RM G070-D-EN February 2023
6.3 DRIVE UNIT INSTALLATION
6.3.1 List of Tools to be used
Use of the Tools
Tools
To fasten M12 flange nuts
Open-end wrench
To fasten the M5*8 screws on disk brake
Internal hexagonal wrench
6.3.2 Motor Installation
1. First place the disc brake on to non-cable
side of the motor and tighten with six
M5*8 screws.
2. Mount the freewheel onto the shaft thread.
3. Place a 4mm washer onto the cable-side
shaft first, then mount two stop pins onto
the right shaft and left shaft respectively.
4. Insert the motor into the frame.
