BAFANG DP C271.CAN, User Manual, Page: 12 / 17

12 BF-UM-C-DP C271-EN June 2022
Content Explanation
TEMP
Current temperature in
degrees (°C)
TotalVolt Voltage (V)
Current Discharge (A)
Res Cap Remaining Capacity (Ah)
Full Cap Total Capacity (Ah)
RelChargeState Default Loader Status (%)
AbsChargeState Instant charge (%)
Cycle Times Charging cycles (number)
M.N.T
Maximum time in which
no charge was made (Hr)
L.N.T Last Uncharge Time (Hr)
Total Cell Number (individual)
SW Software Version
HW Hardware Version
Cell Voltage 1 Cell Voltage 1 (mV)
Cell Voltage 2 Cell Voltage 2 (mV)
Cell Voltage n Cell Voltage n (mV)
NOTE: If no data is detected, "--" is displayed.
7.7.2.3 Controller Information
Press the or (<0.5S) button and select
"Ctrl Info", and then press the (<0.5S)
button to read the software and hardware
data of the controller. To exit, press the
(<0.5S) button, or select “Back” to return to
the information interface.
7.7.2.4 Display Information
Press the or (<0.5S) button and select
"Display Info", then press the (<0.5S)
button to read the software and hardware
data of the display. To exit, press the
(<0.5S) button, or select “Back” to return to
the information interface.
7.7.2.5 Torque Information
Press the or (<0.5S) button and select
“Torque info”, then press the (<0.5S)
button to read the software and hardware
data of the torque. To exit, press the
(<0.5S) button, or select “Back” to return to
the information interface.