![background image](http://html1.mh-extra.com/html/bafang/dp-c10-uart/dp-c10-uart_manual_3427425020.webp)
DISPLAY MANUAL DP C10.UART
7
BUTTON DEFINITION
NORMAL OPERATION
• ON/OFF Switch
Turn on the device, press and hold for 2s to power on the
display. Press and hold again for 2s to power off the display, If
the bike is not used, after 5 minutes (time can be set) the display
will be automatically turned off.
• Assist Mode Selection
In the manual gearshift mode, press the or choose the
desired level of support by the motor. The lowest level is Level
1, the ighest Level 5. When the display is on, the default mode
is Level 1. When there is no numeric mode display, there is no
power assistance.
(power assistance lever selection interface as below figure)