BAE G10 ©2017
4
BAE AUDIO – G10
Troubleshooting
There are many 500 series racks available, each with slightly different power supplies. Some older 500 racks are
notorious for power supply problems.
500 series power supplies are actually two supplies, a +16 Volt and a -16 Volt source. If you turn on the unit, but
get no audio, there is a chance that one of the supplies in the rack has either gone down or is in protection mode.
This has the potential to cause damage to your 1073D if left like this for a long time.
To verify that a power supply fault has occurred, engage all of the push buttons including the 1/4” input switch
with the blue LED. If the blue LED does NOT light, then there is a problem with your power supply.
1073D Specifications & Features
Noise:
Better than -90dB (EQ IN, 1KHz @ 0dBu,
A-weighted)
THD+N:
0.0036% (EQ IN, 1KHz @ 0dBu, A-weighted)
Input Signal Before Clip:
+28dBu (1KHz)
Power Supply:
+/- 16VDC @ 45mA per Rail
Weight
1.75 LBS
Dimensions in Inches
4.5W x 5.25H x 5.5D
Complies with 500 Series Specification for
mechanical and electrical interface
+/- 12dB Boost/Cut @ 31Hz, 63Hz,125Hz,
250Hz, 500Hz, 1KHz, 2KHz, 4KHz, 8KHz,
16KHz
Individually Selectable LPF @ 12KHz, and
HPF @ 80Hz (approx. 6 and 10 dB per oc-
tave, respectively)
EQ In/Out Select Switch (bypasses EQ and
Filters)
Fully enclosed ventilated steel enclosure
CineMag transformer balanced in/out
Top quality components used throughout
