BAE 10DCF ©2017
6
BAE AUDIO – 10DCF
METER
The meter was selected for easy reading and lit with LED’s so there is never a bulb to burn out. It is only for gain
reduction in decibels (dB) in a gas-tank style so that loss of audio level moves the meter to the left. The meter is
internally calibrated, and the outer flathead screw should never be turned.
STEREO LINKING
The 10DC is equipped to be linked in stereo operation if desired. When using two 10DC units, either one of them
could be used as the Master by simply setting the controls so that it compresses or limits more than the other
unit. The unit which is exhibiting more level loss sends its control voltage to the other unit so that both units apply
the same amount of gain reduction. Because this control voltage is not an audio signal, a simple RCA type cable
(provided with the purchase of two units) can be used to link the units together. To minimize accidental linking,
BOTH pushbuttons must be engaged for stereo operation.
BYPASS FILTER
(10DCF Model)
The 10DCF model features a low frequency bypass filter. The rotary switch can adjust from OFF to bypassing
frequencies below which you DO NOT want to compress in the side-chain. These frequencies are 50, 80, 160,
and 300Hz. The idea behind this is that lower frequencies have more energy making the 10DCF react more to
compress and/or limit the audio and thereby affecting the entire audio bandwidth along with it. If lower frequencies
are bypassed, then you can have more control over midrange and higher frequencies while preventing low
frequencies from overtaking the attenuation.
Summary of Contents for 10DC
Page 1: ...10DC DCF INSTRUCTION MANUAL BAE AUDIO...
Page 9: ...RECALL SHEET DATE ARTIST SONG...
Page 10: ...www baeaudio com...
