Page 2
For technical questions, please call 1-888-866-5797.
Item 56412
Specifications
Working Load Limit
12,000 lb
Breaking Strength
16,800 lb
Size
80 ft. x 3/8"
Important Safety Information
Installation Precautions
1. Install only according to winch
instructions. Improper installation
can create hazards. Spool rope
in respooling direction only. Make
sure rope enters and exits winch
at the bottom of the drum.
2. Wear ANSI-approved safety goggles
and heavy-duty work gloves during
installation, setup, and use.
3. Keep installation area clean and well lit.
4. Keep bystanders out of the
area during installation.
5. Do not install when tired or
when under the influence of
alcohol, drugs or medication.
6. Weight capacity and other product
capabilities apply to properly and
completely installed product only.
7. Anchor at both ends using proper
methods to prevent abrasion
and uneven loading.
8. Only use proper techniques to splice
or create loop. Imperfect splices and
loops will greatly reduce rope capacity.
9. Only use with aluminum hawse
fairlead free of nicks and burrs.
10. If winch includes a tensioner, remove
it before installing this synthetic rope.
Use Precautions
1. Do not exceed 12,000 lb. Working Load
Limit.
Be aware of dynamic loading!
Suddenly starting or jerking against
load may briefly create excess
load causing product failure.
2. Inspect before every use; do
not use rope if damaged, faded,
frayed, or partially cut.
3. Lay a dampening blanket or winch
damper over the rope before
winching to prevent whiplash.
4. Keep away from sharp edges and from
high heat, such as exhaust components.
5. Keep at least 10 full wraps
of rope around the drum
when winching. Synthetic rope
requires more wraps than wire rope.
Rope attachment cannot support load.
6. Do not wrap rope around
anchor point. Use a strap.
7. This product is not a toy. Do not
allow children to play with this
item or nearby during use.
8. Do not allow rope to slip
through your hands.
9. Use as intended only.
