Warranty
May 2019
LM_OG-AM_BA_02_1163
Page 3
•
Turn off any associated pumps to reduce line pressure and slowly fill the line and meter with fluid before restarting
pumps. Doing so reduces the possibility of meter damage caused by errant air pressures in the line and meter.
•
Make sure all pipe conforms to the same pressure output rating as the pump.
•
Make sure to apply thread sealant to all pipe threads.
•
Make sure to install the meter as shown in figure 1.
•
Check for and repair leaks upon initialization of fluid flow.
3.1
Recommended filter sizes
Filter / Pore size (in mesh)
Filter / Pore size (in mm)
½"
60
0,250
Please check all connections to leakage. After the installation we recommend to perform several transactions into an
approved piston. Should the use of different oil viscosities show discrepancies by the error limit, it can be immediately
corrected at the site. The pretested meters can be calibrated by technicians or the officials of the national authorities (MID).
4.
WARRANTY
Badger Meter warrants meters and parts manufactured by it and supplied hereunder to be free from defects in materials and
workmanship for a period of 24 months from date of shipment. If within such period any meters or parts shall be proved to
Seller´s satisfaction to be defective, such meters or parts shall be repaired or replaced at Seller´s option. Seller´s obligation
hereunder shall be limited to such repair and replacement and shall be conditioned upon Seller´s receiving written notice of
any alleged defect within 10 days after its discovery and, at Seller´s option, return of such meters or parts to Seller, f.o.b. its
factory. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES
WHATSOEVER INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES (EXCEPT OF TITLE) OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. Badger Meter shall not be liable for any defects attributable to acts or omissions of others after
shipment, nor any consequential, incidental or contingent damage whatsoever.
