ORI-AS-00036-EN-06
GATEWAY IDENTIFICATION - ORION SE
NOTE:
N
This screen applies to ORION SE gateways ONLY
From the left-hand menu, select
Identification
to display the gateway Identification screen The Identification screen holds
the security information for the gateway and is used to set the passkey for the ORION SE gateway
Figure 22: Identification screen
New Utility Passkey
The customer-defined encrypted code (8…32 characters) used for gateway protection
Passkey Strength
Indicates the protective “strength” of the passkey A strong passkey is recommended
Confirm Passkey
The encrypted code is repeated in this field to confirm the correct passkey for the gateway
Set the Utility Passkey
1 Key the passkey in the
New Utility Passkey
field The strength of the passkey will display in the
Passkey Strength
field
2 Key the passkey again in the
Confirm Passkey
field
3 Click
Save
to set the passkey
NOTE:
N
Click
Clear
to remove information from the passkey fields
Gateway Identification - ORION SE
Page 25
April 2015
