Badger Meter ModMAG M2000, User Manual, Page: 13 / 16

Technical data Page 13/14
MID_M2000_BA_MB_02_1805
5. Technical data
The ModMAG ® M-Bus module is providing a EN13757 compatible M-Bus interface to
the Badger ModMAG
®
M2000 flow meter
Product ModMAG ® M2000 M-Bus module
Power supply 2 x +5V from M2000 internal module interface
(+5 V digital, +5V field)
Current 1 mA from +5V digital
10 mA frp, +5V field
ModMAG
®
M2000
interface
2 wire ModBus
®
interface
9600, 19200, 38400 baud auto-baud detection at firmware
start
8 data bits,
1 stop bit,
1 even parity bit
Phoenix IMC 1.5/11-G-3.81 connector to M2000
M-Bus interface 2 wire EN13757 compatible M-Bus interface
300, 2400, 9600 baud auto-baud detection
8 data bits
1 stop bit
1 even parity bit
1 M-Bus unit load (1.5 mA)
15 mA active M-Bus current
M-Bus input with reversible mains protection and protective
earth clamp
3 pin clamp
Isolation 2500 V RMS isolation between M-Bus interface and
ModMAG ® M2000
Module size 54 x 37 mm, maximum height 27 mm
Operating temperature -20 °C … +60 °C (-4 °F … +140 °F)
Storage temperature
-40 °C … +70 °C (-40 °F … +160 °F)
Humidity 90 %
Product life time ˃ 10 years