INSTALLATION
Mechanical Installation
The Series 3050 BTU flow monitor can be either panel-mounted or wall-mounted .
Location
In any mounting arrangement, the primary concern is easy viewing and convenient operation of the keypad . The unit
generates very little heat, so no consideration need be given to cooling or ventilation . However, prolonged direct sunlight can
damage the front panel so some level of shading is recommended, especially if installed in a tropical climate .
Panel Mount Installation
The Series 3050 BTU flow monitor panel-mount model is designed for through-panel mounting, which allows access to the
back of the unit . The monitor is secured to the panel by two draw brackets shown in
below . Also refer to
for
monitor and panel cutout dimensions .
Figure 1: Panel mounting
3.78 in.
(96 mm)
3.78 in.
(96 mm)
3.23 in.
(82 mm)
3.49 in.
(88.7 mm)
3.49 in.
(88.7 mm)
SIDE
TOP
2.21 in.
(56 mm)
3.57…3.60 in.
(90.6…91.4 mm)
3.57…3.60 in.
(90.6…91.4 mm)
PANEL
CUTOUT
5
Figure 2: Panel-mount dimensions and panel cutout
Installation
Page 6
June 2018
DSY-UM-01668-EN-02
