High Resolution LCD Registers, HR-LCD 4-20 scaled/unscaled, HR-LCD Pulse
STATUS INDICATORS
Status indicators for the HR-LCD 4-20 scaled/unscaled and pulse registers are described in the table .
Status Indicator
Icon
Status Description
HR LCD Display
Meter functioning
correctly
Register operating
correctly .
Continuous display on register as long as no other
status indicators are triggered .
Register alarm
Several potential
conditions may exist,
including:
Register removal
Temperature limit
exceeded (34…140° F)
Magnetic tamper
Register alarm remains active for 35 days . The alarm
automatically clears after 35 days if any of the 3
conditions has not recurred .
Reverse flow
Register detects reverse
flow .
Reverse flow alarm remains active for 35 days . The
alarm automatically clears after 35 days if reverse flow
condition has not recurred .
Suspected leak
Register detects 24 hours
without one 15-minute
interval of no flow .
The alarm clears automatically when a 15-minute
no-flow interval occurs .
30 day no usage
No measured flow in past
30 days .
The alarm is automatically cleared once flow occurs .
End of life battery indicator
Indicated battery life
based on pre-calculated
consumption .
Alarm activated at 9 .5 years and does not clear .
www.badgermeter.com
Trademarks appearing in this document are the property of their respective entities . Due to continuous research, product improvements and enhancements, Badger Meter reserves
the right to change product or system specifications without notice, except to the extent an outstanding contractual obligation exists . © 2020 Badger Meter, Inc . All rights reserved .
Control. Manage. Optimize.
