Badger Meter HR-E LCD 4-20, Programmer'S Manual

Page: 9 / 24

Using the Programmer Software
Encoder Types
When you read the device with the IR cable, the software automatically detects the encoder type . The device type and serial
number display at the top of the screen . Software parameters that display on the screen vary depending on the device type .
Examples of completed Programmer screens for all three device types are displayed here .
Figure 11: HR-E LCD screen
Figure 12: HR-E LCD 4-20 screen
OTEE: N The HR-E LCD encoder is used for the examples throughout this manual, unless otherwise indicated .
Page 9 May 2018 ENC-PM-02040-EN-03