Flow-Alert Switch Installation
4� Determine which direction the body of the connector should face� See
Figure 15
�
5� Snap the connector back together, pull the excess wire out of the strain relief, then
tighten the strain relief nut�
6� Plug the connector into the switch module and secure with the screw provided�
C
A
B
Polarity Pin
Figure 15: Polarity pin
Latching Switch AC Wiring Configuration
WARNING
ALL WIRING SHOULD BE MADE IN ACCORDANCE WITH THE NATIONAL ELECTRICAL
CODE® AND MUST CONFORM TO ANY APPLICABLE STATE AND LOCAL CODES.
AC Conventional Connection
OTEE:
N
The load must be within the specified contact rating range of 1A @ 30V
DC/500 mA @ 125V AC�
A
C Line
A
C Line
Switch Module
Contacts
Flow
Circuit
2
4
1
3
Fuse
0.1 A
AC
Load
1
Figure 16: AC conventional connection
Page 18
October 2019
VAM-UM-00367-EN-03
www.
.com
1.800.561.8187
