Installation & Operation Manual
History Icon
The History icon indicates there is dispense result information that has not been
communicated to the keypad to complete a work order.
To send the dispense result information to the keypad, press the
RESET
button to initiate
communication.
Error Codes
The meter has several Error Codes that may display. These provide indication, at the meter, that there is an error in
communication between the meter and keypad.
F01
The meter radio is not working.
To clear the error, press the
RESET
button on the meter.
F02
The meter is not configured to a keypad.
To clear the error code, press the
RESET
button on the meter.
Verify that the meter radio address is configured properly.
F03
System busy.
To clear the error, press the
RESET
button on the meter.
F08
Meter lost connection to network.
Out of range—network connection lost.
Keypad not powered.
Meter moved out of range of keypad.
F09
Meter not connected to a network.
First time being powered up.
Network selected is not available.
SF0
(Scale Factor 0)
The Scale Factor setting for the meter is set to 0.000.
To input a valid Scale Factor for the meter follow the instructions in the Change Factory Settings section
of this manual.
All other
Error Codes
Are for factory purposes only.
To clear the meter, press
RESET
.
History Icon
Page 11
November 2012
