Time Range
The
Time Range
control selects a period to be shown on the X axis . See
for the time choices . When you press the
control, a drop-down menu appears . Highlight a parameter with the blue box and press Set to load the parameter . Press X to
exit the drop-down menu .
10 Seconds
30 Minutes
1 Day
14 Days
30 Seconds
1 Hour
5 Days
1 Month
1 Minute
5 Hours
7 Days
6 Months
10 Minutes
10 Hours
10 Days
1 Year
Table 7: Time Axis Choices
Delete Graph Data
To clear any current graphing data and return the graph scaling to factory defaults, first press
Unlock Graph Data Clear
. A
green checkmark appears and the
Delete Graph Data
button turns red .
Figure 43: Delete graph data
Press
Delete Graph Data
. The graph resets to factory defaults and the
Delete Graph Data
button turns gray .
Table Page
Figure 44: Main > Table
The
Table
page shows all the current values the meter is tracking along with their respective units . The scroll bar on the right
side of the page is used to scroll up or down the list until the required parameter is found .
Main Group
Page 35
November 2016
HYB-UM-00090-EN-04
