4.0/1008/TG
PICTURE 4C
Page 4 of 6
STEP 1:
See PICTURE 1. Insert FOURTEEN PEGS (A) into the peg holes on the ends of the TWO TOP RAILS (B)
and the FIVE SHELF RAILS (C1, C2).
STEP 2:
See PICTURE 2. Attach the TWO TOP RAILS (B), TWO TOP SHELF RAILS (C1), and THREE MIDDLE/
LOWER SHELF RAILS (C2) to ONE END PANEL (D) using SEVEN BOLTS (E). Be sure the shelf grooves on the
rails line up with the shelf grooves on the end panel.
C1
STEP 3:
See PICTURE 3. Rest the table on the END
PANEL (D). Insert the TOP SHELF PANEL (F1) and
MIDDLE SHELF PANEL (F2) into the grooves on the
SHELF RAILS (C1, C2) with the white or the colored
sides facing up (depending on your model). Be sure the
shelves are seated into the grooves on all three sides.
PICTURE 2
PICTURE 1
A
B
C1, C2
B
B
D
STEP 4:
See PICTURE 3. Attach the second END PANEL (D) to the TWO TOP RAILS (B) and the FIVE SHELF
RAILS (C1, C2) using SEVEN BOLTS (E). Be sure the TWO SHELF PANELS (F1, F2) are properly seated in the
grooves on all sides.
STEP 5:
See PICTURES 4A, 4B and 4C. Slip one end of the SAFETY BELT (G) between the TOP RAIL (B) and the
TOP SHELF RAIL (C1). Using the pre-made holes on the SAFTEY BELT (G) and the
underside
of the TOP SHELF RAIL
(C1), sandwich the end of the SAFETY BELT (G) between the METAL SUPPORT BAR (H) and the top shelf rail as shown
and secure with ONE LONG SCREW (I). Repeat to secure the other ends of the safety belt and the metal bar.
PICTURE 3
D
F1
F2
PICTURE 4B
G
B
H
B C1
G
F1
PICTURE 4A
C2
C1
*You must be sure to
use the C1 rails with
the thicker grooves
in the top positions.
*You must be sure to
use the thicker F1
shelf in the top
position.
