Bitstorm Inc.
Bad Boy Unleashed N
www.bitstorm.com
3
Package Contents
Please check and ensure that you have all of the following items:
One BAD BOY Unleashed Device
One White Antenna
One Slide On Holster Mount
2 Screws for Holster Mount
Double Sided Tape Mounting Squares
This Installation and Operation Guide
Bitstorm Contact Info Cards
Note:
Make sure that the box contains the above items. If
any of the listed items are damages or missing, please contact
your distributor.
Chapter 1 - Installation
Check off items as completed.
Ensure that you have a working BAD BOY Xtreme (BAD
BOY Wi-Fi Antenna). Refer to the appropriate product docu-
ments for installation and setup.
With the power turned off
, remove the top cover from
the Power Adapter. Move JP1 and JP2 from position 2-3 to
1-2. This enables power for Unleashed onto Port 2.
Caution:
Do not plug Ethernet cable with PoE power into comput-
er’s ethernet port while jumpers are in position 1-2.
Remove the black protective cap from Unleashed’s RP-SMA antenna con-
nector and attach the antenna by screwing together. Finger tight is ade-
quate
.
Do not over tighten.
Slide off the cover from the bottom end of
Unleashed. Using the patch cable end that
connected to your computer and coming
from the Power Injector, plug it into Un-
leashed’s exposed ethernet connector.
Apply power and verify that Unleashed’s
green Power and LAN LEDs illuminate. If
they do not, refer to Appendix C - Trouble-
shooting.
Ensure your computer’s Wi-Fi device is turned on and try connecting. Refer
to Chapter 2 - Operation.
Surf the web to verify your BAD BOY Unleashed is operating correctly.
Proceed with remainder of installation only after correct operation has
been determined.
