PAGE 12
SECTION 7:
CONTROLS
7.1
Ignition Switch:
Bad Boy mowers have a three-position ignition switch: off, run, and start. With key
inserted, rotate it clockwise to START position and release key when engine starts, and switch will
automatically return to the RUN position.
7.2
Throttle Control:
A cable is connected to the engine throttle for controlling engine speed. Move lever
forward to increase engine rpm, move lever backward to decrease engine rpm.
7.3
Choke Control:
The choke control, located to the right of the operator’s left, is a ‘push-pull’ type.
When the choke knob is pushed in, the choke is in the off (run) position. When the choke is pulled out it
is in the on (start) position.
Do not operate the machine in the on (start) position.
7.4
Control Levers:
These levers control the mower’s speed, direction, and neutral lock. These levers are
used to steer, accelerate, decelerate and change direction.
7.5
Blade Engage Switch:
This switch engages the blades. Pull the switch up to engage the blades and
push the switch down to disengage the blades.
7.6
Parking Brake:
This lever engages the parking brake. Pull back fully to engage the parking brake;
push forward to disengage.
7.7
USB Charging Port:
Your mower is equipped with a USB charging port for your accessory needs.
7.8
Deck Height Control:
The deck height dial is used to set the cut of the deck.
7.9
Deck Travel Lock:
The deck travel lock holds the deck in a transport position.
7.10
Electronic Hour Meter:
Registers Hour increments up to 9,999.9 total hours. This meter records the
cumulative time the engine is running.
7.11
Oil Light:
Alerts the user of a low oil level situation when lit.
7.1
7.2
7.3
7.5
7.6
7.7
7.8
7.9
7.4
7.4
7.10
7.11
Fig. 1
Fig. 2
Summary of Contents for ROGUE Series
Page 1: ...2021 Rogue...
Page 34: ...PAGE 34 2021 Commercial...
