background image

3.9  Increase RPM by sliding the throttle to fast position, toward the rabbit.
3.10  Owners must become familiar with the controls before operating a zero-turn radius vehicle.
3.11  Start slowly and build your skill level. Have ample practice before using the machine at full 

capabilities.

3.12  Be comfortable with machine before engaging blades. Know what each component controls 

before using machine.

3.13  Your mower will perform differently on an incline /decline. Be cautious, slow down, and do 

not make any sudden jerking movements with control arms. The machine could lose traction 
on a decline or tip backwards on an incline. 

3.14  Once you become comfortable with your Bad Boy Mower you will notice your overall mowing 

time will decrease. 

Avoid operating your mower on side hills of over 5 degrees, inclines of over 10 degrees,

and declines of over 15 degrees.

SECTION 4: 

MOWER MAINTENANCE

**Check each and provide maintenance when needed.

DAILY

4.1  Check Engine Oil
4.2   Check Engine Air Filter
4.3  Tire Pressure
4.4  Inspect Blades
Within FIRST five hours of usage, change engine oil and filter

EVERY 30 HOURS OF USAGE

4.5  Grease Machine

EVERY 50 HOURS OF USAGE

4.6   Change Engine Oil and Filters

Check filters once a year if under 50 hours
Check air and fuel filters more often in dry, dusty conditions

Within FIRST 50 hours of usage, change hydraulic oil and filters

EVERY 250 HOURS OF USAGE

4.7   Change Hydraulic Fluid and Filters
4.8  Refer to manufacturer manual for specific information on maintenance schedules.

PAGE  7

Summary of Contents for OUTLAW XP













































Reviews: