![background image](http://html1.mh-extra.com/html/bad-boy/outlaw-stand-on/outlaw-stand-on_owners-service-and-parts-manual_3371484017.webp)
SECTION 5: FRAME
For non-suspension models, torque front fork nut to
40 ft.lbs. Be sure to spin the fork while torquing the nut to
ensure that no bearing damage is done.
Torque rear wheel lugs to 65-75 ft.lbs.
Re-torque at every oil change.
There is one grease fitting in each front wheel and one in
each front caster bearing housing. Grease at every engine oil
change.
There is one grease fitting on each of the actuator bar pillow
blocks located on top of the frame. Grease twice a season.
PAGE 17
Summary of Contents for Outlaw Stand-On
