background image

4

PECO LIMITED WARRANTY FOR NEW PRODUCTS

A. WHAT IS WARRANTED?
 

PECO extends the following warranties to the original purchaser of each new PECO consumer product subject 

 

to the following limitations:

1. PRODUCT WARRANTY: 

Any part of any consumer product, which is defective in material or workmanship as

 

delivered to the purchaser will be repaired or replaced, as PECO elects, without charge for parts or labor, if the

 

defect appears within 12 months from the date of delivery of the product to the original purchaser.

 ALL

 

DEFECTIVE PARTS MUST BE RETURNED TO PECO FOR INSPECTION TO DETERMINE

 

VALIDITY OF WARRANTY CLAIMS. 

Freight and mailing will be borne by the customer.

2. PARTS REPLACED DURING WARRANTY: 

Any new PECO part which is furnished in performance of this

 

warranty and is defective in material or workmanship as delivered to the purchaser will be repaired or replaced,  

as PECO elects, without charge if the defect appears within 90 days from the date of installation of such part or
 

before the expiration of the original warranty period, whichever is later.

B. SECURING WARRANTY ADJUSTMENTS.
 

Call PECO for Return Authorization. Damaged or broken parts, other than engines or batteries, must be 

 

returned to PECO Inc., 100 Airport Road, Arden, NC 28704 before any warranty adjustment can be authorized.

 

At the time of requesting warranty adjustment, the purchaser must present evidence for date of delivery of the 

 

product. The purchaser shall pay any charge for the product to and from Arden, NC.

C. ITEMS NOT COVERED BY PECO WARRANTY.
 

Engines and batteries attached to PECO products are covered under a separate  warranty by the respective

 

manufacturer.

D. UNAPPROVED ALTERATION OR MODIFICATION.
 

All obligations of PECO Inc., under this warranty, shall be terminated if products are altered or modified in ways

 

not approved by PECO Inc..

E. ACCIDENTS AND NORMAL MAINTENANCE.
 

The warranty covers only defective material and workmanship. It does not cover depreciation or damage

 

caused by normal wear, accident, improper use or abuse of products. The cost of normal maintenance and

 

normal replacement of service items such as belts, cutting blades, hoses, etc., which are not defective shall be

 

paid for by the purchaser.

F. NO REPRESENTATIONS ADDITIONAL WARRANTIES, DISCLAIMER.
 

Neither PECO Inc. nor any company affiliated with it makes any warranties, representations or promises as to

 

the quality of performance of its products other than those set forth herein. Except as described above, PECO

 

Inc. makes no other warranties 

AND SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED

 

WARRANTIES OF FITNESS AND MERCHANTABILITY.

G. ANY MACHINE USED FOR RENTAL PURPOSES ARE GUARANTEED FOR 45 DAYS FROM DATE

 

OF ORIGINAL SALE ONLY.

H. REMEDIED EXCLUSIVE.
 

The only remedies the purchaser has in connection with the breach or performance of any warranty on PECO

 

Inc. consumer products are set forth above. In no event will PECO be liable for special incidental or

 

consequential damages.

1. NO SERVICE CENTER WARRANTY.
 

The selling Service Center makes no warranty on his own on any item warranted by PECO Inc. unless he

 

delivers to purchaser a separate written warranty certificate specifically warranting the item. The dealer has no

 

authority to make any representation or promise on behalf of PECO or to modify the terms of this warranty in

 

any way.

Summary of Contents for 48721201





















Reviews: