Bad Boy 3026H 2021 Operator'S Manual Download Page 85

Page: 85 / 152

BAD BOY TRACTOR

STARTING ENGINE

1. Check the fuel gauge. Make sure

that a suffi cient amount of fuel is

in the tank.

11111

(1) Fuel Gauge

2. Check the position of the imple-

ment. Push the control lever for-

ward to lower the implement down

onto the ground.

•

Don’t crank engine unless po-

sition control lever is in the

lowest position.

[Otherwise]

Implement might rise quick-

ly and there is a risk of injury or

machinery breakdown.

•

Check the safety around the

tractor and start to move slow-

ly.

[Otherwise]

There is a risk of injury.

WARNING

(1) Position Control Lever

(A) Lowering

(B) Lifting

2024h_3026h.indb 12

2020-09-18 오후 6:17:25

Summary of Contents for 3026H 2021

























































































































































Search results

Summary of Contents for 3026H 2021

Reviews:

Related manuals for 3026H 2021

Brands by name

Popular brands

Bad Boy 3026H 2021, Operator'S Manual

Search results

Summary of Contents for 3026H 2021

Reviews:

Related manuals for 3026H 2021

Brands by name

Popular brands