![Backyard TF1008-011991-T Assembly, Use And Care Download Page 12](http://html1.mh-extra.com/html/backyard/tf1008-011991-t/tf1008-011991-t_assembly-use-and-care_3334317012.webp)
TF1008-011991-T ENG
P.12
22062011
5. Insert holes on safety legs (6)
into top of stands (1). Align
holes on safety ring (5) with
holes on top of safety legs (6).
Insert M6x12 bolts (A) through
safety ring (5) and tighten into
safety legs (6).
6. When transporting or storing LP cooker without tank
attached, hook regulator onto burner or cooker stand to
prevent damage to regulator.
Using Your Thermometer
Check the thermometer before each use by inserting into a pot
of boiling water and ensuring that it registers approximately
212°F +/- 20°F (100°C +/- 10°C). If it does not function
properly, obtain a replacement thermometer specified by the
manufacturer before using the appliance.
Prior to lighting, position thermometer clip so that at least 2.75”
of thermometer tip is submerged in oil. Reposition
thermometer as necessary to cook. Continue to use
thermometer until burner is turned off.
The following safety measures are recommended when using your fry set.
LOCATION MATTERS
Select a safe place to fry your turkey. It should be in an open area, outside, and on a cement or
brick surface. Place the liquid propane gas tank and fryer so that if any wind blows the heat from
the fryer will blow away from the LP gas tank. Never use your fryer in an enclosed area, near a
wall or on a wooden deck. Keep a minimum clearance of 10 feet from the sides, front and back of
the fryer to any construction.