![background image](http://html1.mh-extra.com/html/backyard-play-systems/pb-8326/pb-8326_assembly-instructions-manual_3386774061.webp)
61
Anchor-It
Anchor-It Strap
1-1/2” Lag
Screw
5/16” Washer
5/16’’ x 1-1/2” Lag Screw (x4)
Fold up
3ODFHVZLQJVHWLQ¿QDOORFDWLRQDQGPRXQW$QFKRU,WVDWORFDWLRQVFLUFOHGDERYH
2. Twist the Anchor-It into the ground until only the loop is exposed.
3. Place Anchor-It Strap thru loop, fold the ends together and attach to the unit as shown.
Note: Keep as little play as possible using any of the holes in the strap that work best.
TIP: When installing Anchor-Its in rocky or hard soil, create a starter hole at the desired locations using either a 16’’ Concrete
Drill Bit, or a long screw driver then insert and install the Anchor-Its as shown. This will allow you to get traction with the Anchor-It
faster and allow the device to seat more securely.
STEP 51