3
Wear safety glasses during drilling, assembly of your playset.
Children should not be allowed in the playset assembly and build area.
Note the hole orientation on parts to avoid having to take parts
apart later.
Some steps require the assistance of two people to ensure proper
assembly, safety during assembly, as well as preventing any damage
to the playset.
All hex bolts and lag screws require a lock washer or lock nut.
To properly install lock nuts, two to three threads must protrude past the
lock nut and be exposed once tightened.
Acorn nuts provide protection in case screw threads protrude past a
surface. Extra acorn nuts are provided for this reason. Please be certain
to use these acorn nuts in the event this condition arises.
If a bolt does not engage in a T-Nut, it may be necessary to first install
without the washers and “grab” the T-Nut. Then back-out the bolt
and install with specified washers.
Due to wood characteristics and the manufacturing process hex bolts
may protrude past a surface. If this condition occurs add additional
supplied washers to eliminate bolt protrusion.
To aid in proper assembly pound T-nuts into their respective hole
prior to assembly
Pound in T-nuts while the part is on the ground to ensure proper seating.
Use a soft material under parts when pounding in T-nuts to ensure
no scratching or de-facing of parts.
Make sure all fasteners used are as specified. Using a fastener not
specified in a particular application may result in too much thread
exposure or not enough thread engagement.
ASSEMBLY SAFETY and HELPFUL HINTS
STOP!!!
Check all parts and hardware before beginning. If any parts are
missing or damaged please circle and call the phone number listed.
DO NOT CONTACT THE STORE OR RETURN YOUR PLAYSET !
KEEP THIS INSTALLATION MANUAL FOR FUTURE CARE
AND MAINTENANCE REFERENCE.
To aid in making your playset assembly easier,
here is a listing of some helpful hints.
*IMPORTANT HARDWARE INFORMATION*
