NOTICE:
If the Part E Tube is too long, to prevent kinks or the tube collapsing, either move
the pump further into the fountain or the tube can be cut to the correct length.
IMPORTANT CARE NOTICE:
Fill the fountain with sufficient water to ensure the pump is well submersed.
Clean and top-up the water on a regular basis.
Always switch off the power button before cleaning and maintaining the pump.
Never allow the fountain pump to run when it’s dry, it may cause permanent
damage.
Risk of electric shock - This pump is not designed and has not been investigated
for use in swimming pools or marine areas.
Do not connect to any voltage other than that shown on the pump.
TOUBLESHOOTING:
If the water pump fails to operate, check the below,
1. If the fountain cannot pump water, check if the power is correctly connected or
check if there is sufficient water inside the reservoir. In case it is still not functional,
check the pump and reservoir for any form of obstructions.
2. If the pump runs with Slow Water Circulation, check the following,
(a) The flow control (if available) on the body of the pump.
(b) Ensure the pump is completely submersed.
Summary of Contents for 906029
Page 1: ......
