INSERT THE (4) SLIDE SUPPORT TUBES INTO THEIR RESPECTIVE PILOT LOCATIONS (FIGURE 1).
PLACE (1) SLIDE RAIL ASSEMBLY ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF THE
SLIDE RAIL (FIGURE 2). HAVE A HELPER BEND THE SLIDE BED TOWARDS THE TOP OF THE SLIDE AND INSERT THE
BED INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS INSERTED WITHIN 1/8" (3mm) OF GROOVE BOTTOM.
STEP 3
SLIDE ASSEMBLY
B
O
T
T
O
M
START HERE
FIGURE 1
SLIDE BED
SLIDE RAILS
FIGURE 2
NOTE:
A HELPER IS RECOMMENDED FOR THESE
FOLLOWING STEPS.
TIP:
SLIDE TUBE SUPPORT
(x4)
A6P00487
487
(x4)
SLIDE TUBE SUPPORT
VIEWING WINDOWS
BOLT WH
5/16x1 1/4
(x4)
H100009
009
(x4)
BOLT - 1 1/4"
47
