Anchoring Instructions
FINAL STEP
DOUBLE CHECK EVERY BOLT, SCREW AND NUT FOR TIGHTNESS. MAKE SURE EVERY BOARD IS
SECURE AND MAKE SURE THE PLAY SET IS LEVEL.
ENJOY YOUR NEW PLAY SET!
NOTE:
1. YOU WILL NEED TO REMOVE SOME FLOOR BOARDS TO INSTALL THE GROUND STAKE
HARDWARE.
2. FAILURE TO USE GROUND STAKES CAN VOID WARRANTY & CAUSE INJURY!
STEP 68
TAP IN GROUND STAKES AT AN APPROXIMATE 45° ANGLE AT THE LOCATIONS SHOWN.
USING GROUND STAKES AS A GUIDE, DRILL 7/16" DIA HOLES.
«SPANISH
BOLT WH 5/16x1/2
(1 PLCS)
NUT BARREL WH 5/16x7/8
(6 PLCS)
WASHER LOCK EXT 12x19
(6 PLCS)
GROUND STAKE
GROUND STAKE
GROUND STAKE
GROUND STAKE
GROUND STAKE
GROUND STAKE
BOLT WH
5/16x1/2
(6)
WASHER
LOCK EXT
12x19
(6)
NUT BARREL
WH 5/16x7/8
(6)
- GROUND STAKE REBAR - A4M00527
(6)
107
Summary of Contents for LIBERTY II
Page 27: ...ROCK WALL ASSEMBLY STEP 4 T NUT 1 4 24 PLCS T NUT 1 4 24 27...
Page 67: ...STEP 28 2 BAY WINDOW ASSEMBLY SCREW PFH 8x2 1 2 16 PLCS SCREW PFH 8x2 1 2 16 67...
Page 72: ...STEP 33 2 SUNBURST ASSEMBLY SCREW PFH 8x1 1 4 16 PLCS SCREW PFH 8x1 1 4 16 72...
Page 80: ...STEP 41 SCREW PFH 8x2 1 2 4 PLCS SCREW PFH 8x2 1 2 4 80...
