Hardware Identification
ASSEMBLY TIP:
Keep and eye out for these boxes which will contain helpful pictures and
information making the assembly process as quick and painless as possible.
Sorting Parts
When removing the parts from the boxes we recommend arranging them by part number
before you begin assembly. This will allow for faster assembly and easily identify any parts
that may be missing or damaged.
Assembly Tips & Tools Required
Owner’s Manual
6
F1
D1
E1
F3
A2
Hardware is identified with a
seven digit alpha-numeric
part number. During
assembly you only need to
reference the last three
digits of the part number as
noted in each step. This will
make finding the correct
hardware easier.
HEX PAN HEAD
M6x1x20
(24)
H101040
Tools Required
A ladder will be needed for assembly. DO
NOT stand or climb on any part of the
structure at any point. Doing so may
result in injury.
A rubber mallet may be useful
during the assembly process.
A tape measure may be needed to
check overall dimensions to
ensure structure is square.
For proper assembly you will need to
ensure that your structure is level before
proceeding to the next step.
Some steps in the assembly process will
require a second set of hands. Make sure
you have a helper available.
You will need to make sure that your
assembly is square before fully
tightening your bolts.
A Phillips head screw driver will
be used in an assembly step.
