C
4
E
Assembly
Step 1:
Put the cross legs (C & D) on a flat surface. Attach the bottom of
connected pole (P) to the upper cross leg (D) and insert a long bolt (HH)
through a washer (KK) and tighten using the hex wrench (E). Then attach
the 360° swivel (G) to the upper side of the connected pole (P) and insert a
long bolt (HH) through a washer (KK) and tighten using the hex wrench (E).
Finally, put the holder pole (F) onto the upper side of the 360° swivel (G) and
insert a short bolt (GG) through a washer (KK) and tighten using the
hex wrench (E). Double check all bolts if tighten.
Remove all protective materials. Be careful not to throw away small parts
such as bolts, washers, etc. that may be wrapped in the protective materials.
E
G
P
KK
F
GG
KK
HH
HH
D
C
