Step 1:
Do not attempt assembly if any parts are missing or damaged.
Step 2:
Hand
tighten 2-3 turns only.
Remove all protective materials and set parts on a flat, non-abrasive surface. Identify parts packed in carton against
the parts list. If you are missing any parts or unsure how to proceed with assembly, call our Customer Service
Center at 1-800-416-3511.
Attach the table leg-1 to the back frame by using two 1/4"x50 mm bolts and Ø6.5x1.0 mm washers as shown in the
. Guide bolts through the holes in the back frame, into the pre-drilled holes in the table leg-1.
Repeat for the leg-2.
F
1
igure
Page 2
IMPORTANT!! PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY!!
TO EXPEDITE ANY FUTURE WARRANTY CLAIMS, PLEASE KEEP INSTRUCTION SHEET, WARRANTY CARD AND RECEIPT
Step 3:
Hand tighten 2-3 turns only.
Attach the two table legs to the table top by using
four 1/4"x50 mm bolts and Ø6.5x1.0 mm washers as shown in the
. Guide the bolts through the holes in
the legs, into the pre-drilled holes in the table top.
F
2
Place the table top upside down on a flat, non-abrasive surface.
igure
Figure 1
Figure 2
K
H
I
K
H
I
A
B
E
C
HW0004
* NOTE: PARTS SHOWN ON PARTS LIST ARE NOT TO SCALE
Ø6.5 X 1.0 MM
WASHER
PARTS LIST
DESCRIPTION
ORDER PART # QTY
1
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
1
HEX BOLT DRIVER
TABLE LEG-2
TABLE TOP
HW0006
FOOT CAP
FACTORY ASSEMBLY
1
FC0131
8
1/4" X 18 MM BOLT
HW0908
2
SHELF
BOLT COVER
HW0105
8
1
1
1/4" X 45 MM BOLT
HW0909
2
1/4" X 50 MM BOLT
HW0090
8
TABLE LEG-1
BACK FRAME
1
HW0495
Ø12.5 X
8
MM
WASHER
Ø .5 X 3
2
AT52873
AT52874
AT52875
AT52876
AT52877
HW0914
1/4" X 15 MM BOLT
HW0467
HW0890
1
Ø15 X
8
MM
WASHER
Ø .5 X 2
1
1
BRACKET
