background image

ATTENTION:

These Bar Chair and Bar Table are not intended for use during any kind of inclement weather and the manufacturer is not

and can not be held responsible for any damages caused as a result of such weather. Weather-related damage,

or damage as a result of the Bar Chair and Bar Table not being stored properly when not in use is not the

responsibility of the manufacturer.

During extended periods of non-usage, off season, or in inclement weather (wind, rain, snow, hail, 

sleet), freezing conditions and extreme heat, the Bar Chair and Bar Table need to be stored in a dry

sheltered place to prolong the life and to avoid damage to the Bar Chair and Bar Table.

2

IMPORTANT WARNING:

Unpack the box on a clean soft level surface and make sure all parts have been included.

If you have any questions or concerns, please visit our website at: www.yotrioint.com

or toll free at: 1-866-905-4107 Monday-Friday 8:30 am to 5:00 am pacific standard time / 11:30 am to 8:00 pm eastern standard time.

WARRANTY:

These Bar Chair and Bar Table come with a one year limited warranty against original manufacture defects. If you experience

 

trouble with your bar chair and bar table, please call the customer service number below.

Toll Free at: 1-866-905-4107 Monday-Friday 8:30 am to 5:00 am pacific standard time / 11:30 am to 8:00 pm eastern standard time.

before you begin

1. Check for damage or missing parts. Call 1-866-905-4107 or email at [email protected] to order missing supplies.

2. Use the carton as a working surface to prevent product damage during assembly.
3. All tools needed for assembly are already included.

 

 

For longer life, cover and store when not in use.

Frame Care:

Wipe clean with damp cloth. Use only mild soap and detergents.

or email us at: [email protected]

Or email us at: [email protected]

Summary of Contents for Ellington 2721196












Reviews: