background image

 

16

 
 
 
 

 

ONE-YEAR LIMITED WARRANTY 

What is Covered Under This Warranty? 
The item you have purchased is warranted against defects in material and workmanship 
for the following parts from the date of purchase for the period of warranty as outlined 
below, but only when the unit is installed and operated in accordance with the instructions 
in this Owner’s Manual and in compliance with local building and fire codes:   
 

Limited 1 Year 

 Stainless Tube/Plate burner 

 

Limited 90 days 

  All remaining parts 

 
How Do I Obtain Warranty Service? 
To obtain warranty service, you must contact our customer service center within the 
relevant warranty period and provide us with a copy of your dated register receipt as proof 
of the purchase date. We reserve the right to request photographs and/or return of the 
defective item(s) and/or such other evidence relating to any claim as we shall reasonably 
require.  
 
What are the Limitations and Exclusions of this Warranty? 
Warranty Limitations: 
 
This warranty is subject to the limitation set forth above. In addition, this warranty is made 
to the original purchaser only and is effective only if items are purchased from one of our 
authorized dealers. This warranty is not transferable. For warranty replacements based on 
warranty claims, we will not be responsible for charges associated with shipments outside 
continental North America at any time or for any reason. 
 
Warranty Exclusions: This warranty is subject to the exclusions set forth above. In addition, 
the following are excluded from coverage under this warranty: any item used for 
commercial, contract or any other non-residential purpose; clearance items, display 
models or items purchased “as is”; freight damage; items subject to misuse, abuse, 
neglect or lack of proper care or maintenance (including without limitation as provided in 
any “care and maintenance guide” or similar information we provide); normal wear and 
tear; damage caused by acts of nature, acts of force majeure, vandalism, fire or other 
casualty, or improper assembly; hardware against corrosion or rusting; purchased or 
replacement parts; and all plastic parts. Also excluded are loss of use or time; 
inconvenience; money; travel; packaging; or incidental, special or consequential damages 
of any kind. Replacement of defective items or parts as provided herein, or (at our sole 
discretion) pro rated refund of your purchase price, shall constitute your sole and 
exclusive remedy for items which are not as warranted. In no event shall our responsibility 
exceed the purchase price of the item found to be other than as warranted. This warranty 
is the exclusive statement of your rights with respect to items you have purchased and 
supersedes any other express warranty or statement, written or oral, made in connection 
with the purchase and sale of such items. The term ”item” when used herein in the 
singular refers to the specific piece found to be defective, and not to the entire set of which 
the item is a part. 
 
Some states do not allow exclusion or limitation of incidental or consequential damage, so 

Summary of Contents for ARV06300


















Reviews: