5
ASSEMBLY
PREPARATION
Before beginning assembly of this appliance, make sure all parts are present. Compare all parts with package contents list
and hardware as listed on page 4 of this manual. If any part is missing or damaged, do not attempt to assemble this
product. Contact customer service for replacement parts.
Estimated Assembly Time: 20 Minutes | DO NOT over tighten hardware!
Tools Required for Assembly (NOT included):
Adjustable or 10mm wrench
1
Select 2 of the
Fire Ring Sections
A
. Overlap the 4 holes
drilled in the right edge of the first section with the 4 holes
drilled in the left edge of the second section. (
NOT
E
: the rolled
edge of each piece should be at the top and should align
closely with the adjoining section. If the rolled edges are
offset where the two pieces meet, switch the overlap.
) Join
together using 4
Bolts
B
on the outside and 4
Nuts
C
on the
inside as shown. Tighten using your adjustable wrench and
the included
Hex Wrench
D
but do not over-tighten.
2
Attach the next
Fire Ring Section
A
in the same manner as
detailed in Step 1. Tighten hardware using your adjustable
wrench and the included
Hex Wrench
D
but do not over-
tighten.
3
A
B
A
C
Hardware Used:
B
Bolt
x 4
C
Nut
x 4
A
A
B
C
Hardware Used:
B
Bolt
x 4
C
Nut
x 4
C
B
Attach the final
Fire Ring Section
A
in the same manner as
detailed in Step 1. Tighten hardware using your adjustable
wrench and the included
Hex Wrench
D
but do not over-
tighten.
Hardware Used:
B
Bolt
x 4
C
Nut
x 4
Contact us for assistance: [email protected]